在线a亚洲v天堂网_超级碰碰在免费视频_久久无吗喷水喷潮视频_国产在线尤物不卡

1504000580681069.png

污泥螺旋壓榨機

污泥螺旋壓榨機

詳細介紹

概述Application

污泥螺旋壓榨脫水系統主要用于污泥的高干度脫水。是一種連續式的固液分離設備。主要由變徑變距的高強度螺旋、低壓區篩框、中壓區篩框、高壓區篩框、底座、傳動等組成;其中高壓區螺旋增加耐磨層,提高壽命;經過旋轉濃縮機預處理的污泥,以10-20%的干度進入壓榨機,在螺旋壓榨的作用下通過篩框脫水,以及在被壓裝置的作用下通過螺旋軸篩內部脫水,使污泥干度達到50%以上,以便后續焚燒或干化;此設備廣泛用于制漿造紙、化纖、石油化工、食品、淀粉、制藥、制糖、印染、市政、陶瓷、冶金等行業的污泥處理,是傳統板框壓濾機與帶式壓濾機的更新?lián)Q代產品;

特點Features

1.與預處理設備-旋轉濃縮機配合使用,出污泥干度高,干度可達50%以上;

2.系統運行成本低,比傳統板框壓濾系統節能約50%;

3.系統PLC控制,自動化程度高,系統連續運行,產量高;

4.系統維護成本低,故障率低,無易損件;

5.統適應范圍廣,各行業污泥處理均能使用。

 

Application

Sludge screw press dewatering system is used for the high dryness of sludge dewatering.

It is a continuous type solid-liquid separation equipment,  mainly composed of variable diameter variable pitch screw high strength, low pressure area of screen frame, medium pressure area screen frame, high screen frame, base, drive, etc; The high pressure screw  increase wear-resisting layer, Improved Service Life;After the sludge rotated thickener preprocessing to 10-20% of the dry degree into the screw press, under the action of screw squeezing through the sieve dehydration, and under the action of device under pressure through the screw inside the shaft sieve dehydration, make the sludge dryness of 50% or more, so that subsequent burning or drying;This equipment is widely used in pulp and paper, chemical fiber, petrochemical, food, starch, pharmaceutical, sugar, printing and dyeing, municipal sludge treatment, ceramics, metallurgy and other industries, is a traditional plate and frame filter press and belt type filter press the upgrading of products;
Features:
1. Used with pretreatment equipment - rotating thickener, dry degree is high, the sludge dryness can reach more than 50%;
2. The system operation cost low than traditional plate and frame filter system energy saving about 50%;
3. PLC control system, a high degree of automation, continuous operation system, high output;
4. System maintenance cost is low, low fault rate and without wearing parts;
5. System to adapt to the broader industry sludge processing all can use.

型號 Model

SPS600

SPS750

SPS900

SPS1100

螺旋直徑Screw diameter (mm)

Φ600

Φ750

Φ900

Φ1100

進污泥干度Inlet consistency (%)

10-20

出污泥干度Outlet consistency (%)

45-60

處理能力Capacity (t/d)

20-40

30-60

40-80

60-110

電機功率Motor Power (kw)

30-37

37-45

45-55

55-75


相關標簽:污泥壓榨機,污泥擠干機,污泥脫水機

上一篇:污泥壓濾機
下一篇:污泥螺旋壓榨機

最近瀏覽:

相關新聞:

歡迎給我們留言
請在此輸入留言內容,我們會盡快與您聯系。
姓名
聯系人
電話
座機/手機號碼
郵箱
郵箱
地址
地址